SH150i Scooter Classic Honda

Motorcycle - Honda SH150i is the latest classic scooter from wing flap manufacturer or Honda marketed for Europe. scooters has a variety of advanced features including Honda SMART Key System, Answer Back System and anti-theft alarm. Then there is the power charger in the console box, headlights, rear lights and signals using the type of LED, so it looks very elegant.

honda sh




For body frame using high tensile steel tubular under bone which claimed more powerful and rigid when worn. While the legs wear a showa size 33mm telescopic fork, and rear suspension can be setup wear dual damper swing arm with 5 steps pre-load. 
This Honda scooter machine business uses liquid cooled engine and 4 steps SOHC, the power generated reaches 10.9 kw (14.6 tk) at 8,250 rpm with 13.9 Nm of torque at 6,500 rpm. Fuel used to reach 40.9 km / liter, other features use a standard switch as a safety side before the rider turn on the engine. the fuel tank capacity reaches 7.5 liters, with enough luggage to keep the full face helmet.


General specifications SH150i

Dimensions

Overall length: 2,026 mm
Overall width: 740 mm
Whole Height: 1,150 mm
Wheelbase distance: 1340 mm
Height of seat: 799 mm
Height of footrest: 288 mm
Low distance to ground: 146 mm
Motorcycle weight: 136 kg
Maximum charge: 180 kg


Frame

Type of order: under bone
Front suspension: 33 mm telescopic fork, 89 mm Axel travel
Rear suspension: swing unit
Front tire size: 100/80 - 16M / C 50P
Rear tire size: 120/80 - 16M / C 60P
Front brake: single hydraulic disc brake
Rear brake: single hydraulic disc brake
Angle of caster: 26
Trail length: 85 mm
Fuel capacity: 7.5 liters





Machine

Diameter and step: 58,000 X 57,907 mm
Machine volume: 153.00 CC
Compression ratio: 10.6: 1
Compression pressure: 1.098 kpa at 850 rpm
Maximum power: 10.9 kw / 8.259 rpm
Maximum torque: 13.9 nm / 6,500 rpm
Movement of the valve: OHC driven chain
Lubrication system: forced pressure and wet oil tank
Type of oil pump: Trochoid
Cooling system: coolant with liquid
Air filter: viscous paper strainer
Emission management system: crankcase emission control system three-way catalytic converter
Fuel system: PGM - FI
Throttle diameter: 26 mm
Coupling system: automatic, dry centrifugal clutch
Final reduction: 10,552 (53/17 X 44/13)
Ignition system: full transistor
Starter System: electric starter
Filling system: alternator with three-phase output
Regulator: full three-phase wave rectification
Lighting system: battery
Stationary rotation: 1700 +/- 100 rpm
Fuel pressure: 263 - 316 kpa
Engine oil capacity: 0.8 liters
Coolant capacity: 0.46 liters
Transmitter oil capacity: 0.12 liters

Honda SH150i Price: 4,000 $


For more details and how it looks, and do not forget Subscribe bro ..






OK bro, so many of us do not forget to prioritize the safety of driving and do not arrogant street.

Comments

Post a Comment

Popular posts from this blog

Honda Click 150i,This is Solution for Your Electric Starter

Image
Motored — How are you today? Hopefully very remarkable, this article will discuss Honda Click 150i in the electrical system. That is a problem with electric starter system that often does not work, but we must know Honda Click 150i using ACG starter technology included in esp (enhanced smart power) Honda flagship technology. Before we get to the point of the problem should first understand what it is Esp and its features? What is the ACG (Alternating Current Generator), the cause of damage to electric starter Honda Click 150i? And how to fix electrically starter Honda Click 150i? About ESP Technology Esp is a technology on Honda's scooter manufacturer globally, which is applied to the latest generation of scooter engines. The purpose of using this technology by Honda manufacturers to increase combustion efficiency and reduce wasted energy, it will produce fuel efficiency and scooter performance is increasing. ESP Technology Components ACG Starter Technolog
Read more

Honda Click 125i Indonesia, Review

Image
Motorer — Honda Click 125i one of the latest scooter of Honda issued in early 2018, this scooter at a glance almost the same as his elder brother that is Click 150i. Location difference in Click 125i is not equipped with Honda Smart Keys System, and still wear conventional ignition. This scooter has a 124.8 CC engine volume with a step length of 52.4 mm and has a piston diameter of 52.4 mm. Another difference lies in discs that use conventional disk instead of Wavy Disk Brake, to display between Honda Click 125i with Honda Click 150i has no striking difference. For more details, here are the specifications: General specifications Click 125i Dimensions Honda Click 125i Overall length   : 1,919 mm Overall width    : 679 mm Whole Height    : 1,062 mm Wheelbase distance: 1,280 mm Seat height       : 769 mm Low distance to ground: 132 mm Motorcycle weight: 111 kg Baggage Capacity: 18 L Honda Click 125i, Solution Electronic Starter Frame
Read more

What Causes The Connecting Rod to Break and Fix It?

Image
Motorcycle — Welcome back to the blog that contains about the motorcycle, Which we will discuss the piston rod. Starting from the piston rod function? What is the symptom of the damage? What is the effect of the damage? And how to fix it? Understanding Connecting Rods Connecting rod is a component that serves to connect the piston with the crankshaft, the piston rod works with up and down motion caused by the impulse of the piston and forwarded to the crutch. Because the impulse of the piston with the pressure changes, that is, when the piston moves to the Top Dead Point (TMA) the connecting rod will work heavier as it gets pressure from the piston. Conversely, as the piston moves to the Lower Dead Point (TMB), the connecting rods will work much lighter. A simple example when a motorcycle engine is at 6,000 rpm, the connecting rod will receive a load of 2440 grams as it moves towards TMA. But when going to TMB connecting rods will receive a load of 1300 grams, bec
Read more